ACQ460 - does not link to Function_Keys and PC software

I have just added the ACQ460 Tunze controller to my system. The Dimmer pump options appear on the controller and I can set the various timed programs.

However...
I can only switch off individual pumps attached to the ACQ460 via the 'manual commands' option on the controller. The 'program' option only allow them to be switched down to 10% minimum.

Also, when I fire up the PC software, there is nothing related to the Dimmer unit.

I would like to add the pumps attached to the ACQ460 to my Function Keys (enabling me to switch the pumps off during feeding for example).
Likewise XY programs (athough that is not that important to me at the moment...)

Currently, I can only switch things on/off automatically via the plugs on the plug_bar, rather than the 1-4 pumps attached to the ACQ460 Dimmer unit.

Is there a new software release coming for the PC, and is there any firmware update to be able to choose the individual Pumps on the ACQ460 to be added/controlled into the Function_keys and XY programs (enabling switch off)?

I am using the latest available software and firmware.

Regards
Marek